S-2.1, r. 14 - Regulation respecting occupational health and safety in mines

Full text
208. (Revoked).
O.C. 213-93, s. 208; O.C. 460-2000, s. 19; O.C. 80-2023, s. 16.
208. Where a worker is raised by means of the bucket of a loader, for work other than that mentioned in section 207, the following standards shall be respected:
(1)  an anti-skid detachable floor anchored to the bucket shall be installed;
(2)  the bucket shall be equipped with a mechanism or other means of protection preventing its floor from approaching nearer than 2 m (6.6 ft) to any obstacle located above it;
(3)  a valve preventing the sudden descent of the bucket shall be installed;
(4)  an anti-dumping locking system shall be installed on the bucket;
(5)  the loader shall be equipped with a device preventing the bucket from being raised without the secondary brake being applied;
(6)  the lifting operations may be carried out only when the loader’s axles are in a horizontal position;
(7)  an operator shall be at the controls of the loader, unless it is equipped with a double control from the bucket;
(8)  the worker shall be attached by means of a lanyard complying with sections 5.1 and 6.
O.C. 213-93, s. 208; O.C. 460-2000, s. 19.